Prestige Hallandale Beach ConcretePrestige Hallandale Beach Concrete

Concrete cutting in Hallandale Beach FL - clean openings with the dust kept down

Need a doorway in a block wall or a pipe through a slab? We check what's inside, cut wet and leave a clean, square opening.

Stamped concrete patio with curved seating and fire pit, wicker furniture, and a black pergola beside a house.

Who can cut a doorway or opening in concrete in Hallandale Beach?

Concrete cutting means sawing clean openings into concrete that's already there, like a doorway in a concrete or block wall or a hole through a slab for a pipe. Prestige Hallandale Beach Concrete does this work in Hallandale Beach and the cities around it in south Broward and north Miami-Dade.

Most calls are for a new door or window in a block wall, a pipe run through a floor, or a bad section of old slab cut out so a new concrete driveway or patio can go in. The price moves with how thick the concrete is, how big the opening is, how much steel is inside and whether we're working indoors, because each one changes the saw, the time and the cleanup. The schedule mostly turns on the city's paperwork and, on some slabs, a scan or an engineer's review before we cut. We're licensed and insured, and we take care of the permit paperwork with the city's building office.

How do you know you need concrete cut?

Concrete cutting usually isn't a repair you notice on its own. It's the first step of another job, so the signs are the plans you're making and the old concrete standing in their way.

  • You want a new door or window in a concrete or block wall, and it needs a clean, square opening.

  • Your plumber or electrician needs a line through the slab floor, which means a small, careful hole.

  • A driveway section has cracked and sunk, so it has to be cut out before new concrete goes in.

  • Your patio slopes toward the house and water pools by the wall, so that piece usually needs replacing.

  • One slab has lifted above the next and people trip on it, so it often needs cutting out.

  • You're widening a driveway or patio, and the old edge needs a straight cut so the new pour meets it.

If someone's already planning to cut, call before they start, because the cut is the one part of the job you can't take back.

What happens when you call us about cutting concrete in Hallandale Beach?

I come out myself, our own crew does the cutting, and the city's paperwork and noise rules shape when the saw can run. Here's how it goes from your call to the walk-through.

  1. Call or send a request

    Call (786) 396-8073 or send the form, and tell us where the cut goes and how big it needs to be. If you know the slab is post-tensioned, with steel cables pulled tight inside it, tell us, because that changes the plan.

  2. I measure and write it up

    I come out, measure the wall or slab, look at what's around it and hear what you need. You get a written estimate that spells out the cut, the cleanup and anything that has to happen first, so you know what you're paying for before we start.

  3. We handle the city paperwork

    We sort out the permit paperwork with the city before we set a date. If the job counts as excavation or demolition, state law also calls for notice through the state system at least two full business days ahead, so that sets the earliest start.

  4. We cut, clean up, walk it

    Our crew, led by a foreman, keeps the cutting outside the hours the city's noise rules list for building work, 6 p.m. to 8 a.m. Monday through Saturday and 1 p.m. to sunset on Sunday. When we're done, I walk the finished opening with you.

Get a written estimate for your concrete cut

We reply within one business day, then I come out and give you a free written estimate on site, with no obligation. Note where the cut goes, how big it is, and whether the slab is post-tensioned.

Hours
Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

Saws, scanning and the slabs we cut into

Wall sawing is the standard way to cut a door or window opening, with a large blade that runs along a track fixed to the wall so the cut stays straight. Gas hand saws are normally kept for outside work because of the exhaust, and hand saws also run on hydraulics, compressed air or electricity. If the cut is inside your house, ask any crew which power source they plan to bring.

A blade through one of the cables in a post-tensioned slab can weaken it, so on a PT slab we scan before we cut, usually with ground-penetrating radar, a device that reads what's buried in the concrete. A large opening cuts through several cables at once, so it gets an engineer's look before we start. Not every building is built this way, so it's one of the first things I check at the estimate.

Concrete cutting questions we hear in Hallandale Beach

How much does concrete cutting cost in Hallandale Beach?

There's no flat price, because every cut is a different size, depth and spot. Beyond thickness and steel, the cost goes up with the number of cuts, tight access, indoor work that needs more slurry control, and any scan or engineer's review a post-tensioned slab calls for. I'll give you a written figure after I see it.

Why do you scan a concrete slab before cutting it?

We scan a post-tensioned slab so the blade misses the tensioned cables inside it. Scanning helps a lot, but it isn't perfect. A scanning guide from Australia notes that radar is best at finding metal, shows non-metal objects only faintly, and loses its signal in tightly packed rebar, the steel bars that reinforce the slab, which can hide what's deeper.

How do you keep dust down when cutting concrete?

We run water on the blade, which cuts the dust substantially when sawing concrete, brick and block. The water turns the dust into slurry, a gray runoff that has to be vacuumed or contained, so we plan that cleanup before we start. Ask any crew you talk to how they'll handle it.

Do I need a permit to cut concrete in Hallandale Beach?

Ask the city's Building Division, which handles permits and inspections in Hallandale Beach and takes every permit document through its online portal. We take care of that paperwork and check with the office whenever a job's needs are unclear. If the contract is over $5,000, the city also requires a Notice of Commencement, and a recorded copy goes in with the permit application or stays on the job site before the first inspection.

How long does it take to cut an opening in concrete?

The cut itself is usually the quick part, and most of the wait comes before it. Permit paperwork, a scan on a post-tensioned slab and an engineer's review for a big opening all have to happen first, and your estimate lists which ones your job needs.

How do I check a concrete contractor's license in Broward County?

Use Broward County's contractor license search, which lets you look up a contractor's licenses before you hire. Look up anyone you're thinking of letting cut into your house, us included.

Tell us where the cut needs to go

Call (786) 396-8073 or use the form, so the cut is planned and done before your plumber, framer or new pour needs that spot.

Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

(786) 396-8073Request an estimate