Prestige Hallandale Beach ConcretePrestige Hallandale Beach Concrete

Garage floor concrete in Hallandale Beach FL - a slab that holds up to your car

Cracked, sunken or dusty garage floor? We dig out and pack the base, then pour a new slab with the joints planned before the truck shows up.

Garage floor coated in gray, white, and black decorative flakes, with a raised edge and storage cabinets behind it.

What goes into a new garage floor in Hallandale Beach?

Garage floor concrete in Hallandale Beach means breaking out the old slab, digging out and packing the base, and pouring a new floor that our crew compacts and finishes into a hard, even surface for your car and whatever else you keep in there. The way a slab is finished affects how strong it ends up, so that part isn't rushed.

Most garage floors we replace didn't fail on top, because the base under them settled and the slab cracked or dropped with it. The price moves with the size in square feet, how much old concrete comes out, what the base needs and whether you add steel or a finish like decorative concrete, while the schedule turns on the city permit, the weather and the cure. I give you both in writing after I see the garage. We're based in Hallandale Beach and have poured slabs across the cities around it in south Broward and north Miami-Dade since 2013.

How do you know your garage floor needs replacing?

A garage floor usually shows trouble a good while before it fails. These are the things homeowners point out to me, and what each one usually means under the surface.

  • A crack that keeps getting wider usually means the base under that spot has settled away.

  • A lip where the garage meets the driveway often means one slab sank and the two were poured tight together.

  • Water that pools on the floor instead of running out the door means parts of the slab have dropped.

  • A floor that dusts or flakes when you sweep usually had a weak top from a rushed or hot pour.

  • Cracks running every which way with no cut lines nearby mean the joints were skipped or cut too late.

  • A spot that sounds hollow when you tap it often has a gap underneath where the dirt washed out.

Call when a crack is growing or the floor is moving, because waiting usually means more slab to break out, and I'd rather look at it early.

What happens when you call us about a garage floor in Hallandale Beach?

Here's how a garage floor job runs with us, from your first call to the day you park on it again. I handle the start and the finish myself, and our own crew does the work.

  1. Call or send us a request

    Call (786) 396-8073 or use the form and tell us the garage size and what's wrong with the floor. I come out myself to measure, look at the old slab and the base, and hear what you need.

  2. Get a written estimate

    You get a written estimate that spells out the tear-out, the base work, the joint layout and the pour, so you know what you're paying for before anything gets broken. We sort out the permit paperwork with the city before we set a pour date.

  3. Prep the base and pour

    Our crew, led by a foreman, breaks out the old floor, packs the base, sets the forms and pours. Then they clean up and haul off the debris.

  4. Walk the finished floor together

    I walk the job with you and show you where the joints are and why they're there. I'll tell you when the floor is ready for your car and for heavier things.

Get a written estimate for your garage floor

We reply within one business day, then I come out for a free on-site estimate with no obligation. Include your garage size in square feet and your flood zone if you've looked it up.

Hours
Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

Base, steel and pour timing on a garage floor

The base matters more than anything you'll see. The subgrade, the ground the slab sits on, has to be dug out and packed hard, not raked level, or the new floor settles right along with the dirt. It's hidden the day we pour, so it's the first thing a tight budget cuts. I'd spend your money there before a fancier finish, because a nice surface on a soft base cracks anyway.

Rebar is steel bar set in a grid inside the slab, and wire mesh is a lighter welded grid, and neither one stops concrete from cracking. Industry guidance says mesh tends to keep cracks and joints from opening up, so a crack stays tight instead of spreading. If a higher yard beside the garage keeps washing dirt onto the slab, a short concrete retaining wall can hold it back.

Heat is the other thing I plan around here. Industry guidance on hot weather pours says heat makes concrete set faster and harder to finish, raises the risk of shrinkage and heat cracking, and that adding water on site to cope lowers the slab's strength. A rushed midday pour is how you get a weak, dusty top later, so it's fair to ask any crew how they handle a hot day.

Garage floor questions we hear in Hallandale Beach

How much does a new concrete garage floor cost in Hallandale Beach?

A concrete garage floor slab in the Miami and Fort Lauderdale area usually costs about $7 to $12 per square foot, and that's the going rate for the slab, not our price. Around Fort Lauderdale, a reinforced slab runs a little more per square foot than a plain pad, and breaking out an old floor or fixing a bad base adds to it. I give you your own number in a written estimate after I measure.

Do I need a permit to replace my garage floor in Hallandale Beach?

The city's rule is to always obtain a permit before you make any improvements to your property, and its Building Division handles permitting and inspections. We take care of the permit paperwork with the city and check with that office before we start if anything about your job is in question. If you'd like to ask them yourself first, the Building Division is at (954) 457-2220.

How long does a new garage floor take before I can use the garage?

The slab should be walkable within 48 hours, but concrete takes about a month to fully cure, which is the slow hardening that keeps going long after it looks dry. To be safe, owners may wait a week before putting heavier loads on it, so plan on keeping the garage clear that first week. I'll tell you when yours is ready for your car and heavier things.

Will my new garage floor crack like the old one?

Some cracking can't be prevented entirely in any concrete, but industry guidance says properly designed joints control it and keep it to a minimum. Control joints are cuts that give the slab a straight line to crack along, and we set a separate joint where the garage meets the driveway so each slab can move on its own. That's why the joint layout is worth comparing when you line up quotes.

Does my flood zone affect a garage floor job in Hallandale Beach?

It can, if your home is in a Special Flood Hazard Area and its finished floor sits below the required flood elevation, because city floodplain rules and state building codes may then affect how you remodel or repair. You can look up your flood zone, Base Flood Elevation and, when available, Design Flood Elevation in the city's property search. Send me what it shows and we'll check with the building office before we start.

How do I hire a licensed concrete contractor for a garage floor in Broward County?

Hire one who can sign your permit application, because the city has it signed by the qualifying licensed contractor doing the job unless you're the owner building it yourself. Broward County licenses the construction trades, issues Certificates of Competency and gives the public a way to register complaints and mediate disputes that come up during construction. We're licensed and fully insured.

Get your garage floor planned right

Call (786) 396-8073 any day until 11 PM, use the form or email sales@concretehallandalebeach.com, and every garage floor we pour is backed by our satisfaction guarantee.

Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

(786) 396-8073Request an estimate