Prestige Hallandale Beach ConcretePrestige Hallandale Beach Concrete

Decorative concrete in Hallandale Beach FL - a finish that suits how you use the space

Patio or pool deck looking faded, stained or tired? We add color, texture or a fresh topping, sealed for the way you use it.

A tan decorative stamped concrete driveway and curving walkway lead to a stone-and-wood house in a landscaped yard.

Can you make my plain concrete look better without tearing it out?

Decorative concrete in Hallandale Beach is concrete finished for looks as well as wear, with color, texture or a pattern sealed on top. We do it on a new pour, or as a thin topping bonded over a sound slab you already have.

Most calls start with a patio, walkway or pool deck that's still solid but looks tired, or a new slab you want to be more than plain gray. The price depends on the old slab's condition, the size of the area, how many colors or patterns you pick and which sealer goes on. The schedule depends mostly on whether we're topping what's there or pouring new, and your written estimate spells out both for your surface. We're based in Hallandale Beach and work across south Broward and north Miami-Dade, indoors too, where a stained or polished look starts with concrete floor installation.

How do you know your concrete is ready for a new finish?

Most decorative jobs start with a slab that works fine but looks tired, or a finish that's let you down. These are the signs homeowners tell us about, and what each one usually means.

  • The surface is solid but faded, stained or patchy, which usually means it's ready for a new finish.

  • The sealer has gone dull or peeled where you walk most, so it's likely due for a recoat.

  • Your pool deck feels slick when it's wet, which often points to a film sealer with no grit.

  • Worn spots and light chipping on a slab that's otherwise solid often mean a topping can renew it.

  • Water pools on the slab or runs toward the house, which usually means the slope needs fixing before any finish.

  • Sinking, heaving or wide cracks usually mean the slab isn't sound enough to top, so it likely needs replacing.

If the slab is sinking or cracked wide, call (786) 396-8073 before you pay for a new finish, because a topping can't fix what's under it.

What happens when you call us about decorative concrete in Hallandale Beach?

Here's how a decorative job runs with us, from the first call to the final walk-through, and who handles each part so you always know who to ask.

  1. Call or send a request

    You call (786) 396-8073 or send a request through the form, and we set a time for me to come out. We're open seven days a week, into the evening.

  2. I measure and check the slab

    I come out, measure, check whether the old slab is sound enough to top and hear what look you're after. You get a written estimate that spells out the work, the finish and the sealer, so you can see what's driving the price before you decide.

  3. We sort out the city paperwork

    We handle the permit paperwork with the city before we set a date. If there's any question about what your job calls for, we check with the building office first.

  4. Our crew finishes, we walk it

    Our own crew, led by a foreman, preps, forms, pours or tops, colors, seals and cleans up. I walk the finished job with you, and it's backed by our satisfaction guarantee.

Get a written estimate for your decorative concrete

We reply within one business day to set a time. I come out to look at the slab and give you a free estimate on site, with no obligation.

Hours
Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

Finishes, toppings and sealers for your surface

Decorative concrete can be one technique or a mix of several: color mixed into the concrete, a chemical stain, texture worked into the surface, exposed stone, a stamped or embossed pattern, or polishing, with a sealer over the top. If your old slab is solid, we can often refresh it with an overlay instead of tearing it out. That only works when the slab is sound enough to bond to, and if yours isn't, I'll say so plainly.

A stamped overlay is a thicker topping pressed with mats to look like stone, brick, slate or wood plank, and it's a common pick for patios and pool surrounds. On a new pour, I put the money into the base first. The subgrade, the packed ground under the slab, is hidden on day one, and a pretty pattern on ground that settles just cracks with it. Where the yard drops away, concrete retaining walls hold that ground in place.

Every finish ends with a sealer, and that choice matters as much as the color. I walk you through it at the estimate, weighing a richer look against how often you'll want it redone. Ask any crew when they plan to seal and how heavy each coat goes. Sealer laid on in the heat or too thick usually turns hazy or bubbles, especially on a pool deck in full sun.

Decorative concrete questions from Hallandale Beach homeowners

Can my old concrete patio in Hallandale Beach be resurfaced instead of replaced?

Yes, if the slab underneath is sound, because an overlay is a thin cement topping that has to bond to solid concrete to hold. If yours is sinking, heaving or broken up, the topping will just follow it, so the slab needs replacing first. I'll check it on site and tell you plainly which way it goes.

How much does decorative concrete cost in Hallandale Beach?

The price comes down to your slab's condition, the size of the area, how many colors and textures you want and which sealer goes on. A sound slab that only needs a topping usually costs less than a tear-out and new pour, and a stamped pattern runs more than a plain color. You get the figure for your job in a written estimate after I've seen it.

How often does sealed decorative concrete need to be resealed?

One sealer maker's guide says film sealers need recoating every 18 to 24 months, while penetrating sealers last three to five years. Penetrating sealers bring out less color, so you're trading a richer look for less upkeep. I'll lay out both options for your surface before anything goes down.

How do I keep a sealed pool deck from getting slippery when it's wet?

Add grit to the sealer, because film sealers can get slick when wet. The same maker suggests sprinkling grit into the first coat while it's still tacky, or using a sealer with grit already in it. For a salt pool, that maker also advises a sealer built to resist chloride, while a standard chlorine pool usually does fine with an acrylic film sealer.

Who handles permits for concrete work in Hallandale Beach?

The city's Building Division handles permits and inspections for construction, and its Engineering office reviews permits for work in the city's right-of-way, the public strip along the street. We're licensed and insured, we take care of the permit paperwork, and we check with the building office before we start if there's any question. Florida contractor licenses come in two kinds: certified ones work anywhere in the state, and registered ones cover only the cities or counties where the contractor holds a local certificate.

What is a Notice of Commencement in Hallandale Beach?

It's a document the city requires when the total contract price is more than $5,000. A recorded copy goes in with the permit application or stays on the job site before the first inspection. It matters because the city's permit page warns that if a contractor doesn't pay subcontractors or material suppliers, they may look to your property for payment, even when you've paid the contractor in full. We're licensed and fully insured, and our own crew does the work.

Get your slab checked before choosing a finish

Call (786) 396-8073 or use the form with the surface type, its rough size, how the old slab is holding up and whether your pool is salt or chlorine, so I come out ready to talk real options.

Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM

(786) 396-8073Request an estimate